Cangzhou Chaoyi Roll Forming Machine Co., Ltd
Future by heartiness，Faith leads to the world
Add to Cart
This model machine can produce two different samples. Up deck is Glazed Panel. Down layer is Trapezoid Panle. With fast speed and high quality.
Profile
These two samples also can be customized. Just send us your smaples, we will design and produce the double deck machine for you.
What is the Technical Parameters?
Specifications
| Roller steps | 16 upper layer/16 bottom layer |
| Dimension | 7200*1600*1550mm |
| Weight | 7.5t |
| Feeding width | 1200mm |
| Forming thickness | 0.28-0.8mm |
| Large frame | 400mm H-Beam |
| Diameter of roller | Φ75mm |
| Middle plate | 16-25mm |
| Chain Size | 1 inch |
| Voltage | 380V 50HZ 3 phases or customized |
| Motor power | 4kw |
| Pump station power | 3kw/(7.5kw hydraulic motor) |
| Transducer power | 3.5kw |
| Cutting system | Hydraulic cutting(avoiding noise and smooth cut) |
| Material of cutting | Cr12 |
| Control system | PLC brand :Panasonic |
| Length error : ±2mm | |
| Production capacity | 2-3m/min |
| Warranty | 1 year and we provide technical support for whole life, and overseas service |
Components Details
| Roller Material | High grade 45# steel. Hard chrome plating, 0.05mm. |
| Main Frame | 350# steel. More stable and no shaking. |
| Middle Plate | 16mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 16, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. |
| Treating process: tempering- finish turning, high rigidity, hard to deform. | |
| Cutting Blade Material | Cr12, hardness HRC60-62. |
| Treating process: heat treatment- plane abrasion- wire electrode cutting. |
Usage:It is used to support the steel coil and Material of rollers:45# steel,roller surfaces
uncoil it in a turnable way. The steel coil is polishing, hard plating .The polished surface and the
uncoiled by hand. heat treatment towards the molds also can keep the
Loading capacity:5T molding plate surface smooth and not easy to be
Inner diameter: 500-508mm marked when it is being stamped.
Power:4kw, The target piece's length is adjustable and digit of
Hydraulic oil: 40# it can be adjusted.Computed mode has
hydraulic oil into the hydraulic oil tank , the pump two modes: automatic and manual one.
drive the cutter machine to begin the cutting job. The system is easy to operate and use
Material of the cutting:Cr12Mov with quenched It adopts welded steel and supported roller to
treatment.It can decide cut panel dimension transmit the products,which is used to collect
according to the hydraulic drive and PLC computer the finished products.
control system.