Cangzhou Chaoyi Roll Forming Machine Co., Ltd
Future by heartiness，Faith leads to the world
Add to Cart
Standing Seam Wall Glazed Tile Roll Forming Machine
The roof slab roll forming machine equipment belongs to the cold bending equipment. A basic principle of the cold bending forming process is: the strip is bent in a straight line along the longitudinal direction. However, the pressure generated in the bending deformation process is combined with the residual stress in the strip, and the strip often deviates from the cold bending equipment. To describe the degree of deviation of the strip from the last forming roll, the most commonly used words are: side bending-bending in the horizontal direction, warping-bending in the vertical direction, twisting-in a spiral shape. In order to solve this problem, a straightening mechanism should be used at the end of the roll forming machine. The basic principle of the straightening mechanism is that for profiles with defects such as side bends and warpages, the correcting mechanism should be subjected to sufficient pressure in the opposite direction to cause permanent deformation. If the amount of deformation in the opposite direction is appropriate, the profile can be completely straightened after rebounding.
If the profile is twisted in a certain direction when the color steel roll forming machine is formed, the straightening mechanism rotates the profile in the opposite direction in order to produce permanent plastic deformation. If the angle of rotation is appropriate, the profile will no longer be twisted after rebounding.
The floor deck produced by the deck deck machine is made of galvanized steel sheet by roll forming, and its cross section is V-shaped, U-shaped, trapezoidal or similar shapes. It is mainly used as a sexual template and can also be selected. For other purposes.
Sepcifictaion
| Applicable material | GI/PPGI/AL |
| Motor Power | 7.5KW forming system |
| Forming station | 13 stations |
| Transmission | by chain-and-gear |
| Measuring accuracy | +/- 2 mm/M |
| Producing speed | 8-15m/min |
| Motor power of Oil pump station | 5.5KW |
| Power | 380V 50Hz (as per local requirement) |
| After-sales Service | Engineers available to service machinery overseas |
| Warranty | 36 month During the period: parts are free, and buyer pay the freight only. |
Features of steel floor deck:
1. Light weight, high strength, heavy bearing and good seismic resistance;
2. The construction is simple and quick, and the assembly is convenient;
3. Replace the traditional template, the shortcomings of the traditional template;
4. It can be used as part of structural strength to reduce material costs;
5. Easy construction of reinforcement, wiring and piping;
6. The appearance is neat and beautiful;
Construction sequence of steel floor bearing plate pressing machine-concrete composite structure:
(1) The surface of the steel beam is clear and clean, and the steel floor slab is welded to the steel beam according to the plan plan;
(2) According to the welding procedure, weld the steel bearing plate to the steel beam;
(3) Use clamps to fix the buckle between the diamond bearing plates;
(4) Fix the scissors nails with a welding torch at the composite wind beam;
(5) Tie the steel mesh according to the design requirements;
(6) Pouring concrete.
